What is Full front (PPF)?
Definition
Full front (PPF) is a common PPF package covering the full hood and fenders, the front bumper, side mirrors and often the headlights — the panels that take the most highway rock damage. Broader than a partial front, narrower than a full-body wrap.
Why it matters to a shop
It is the most-quoted PPF package there is, which makes it the one to model properly: the same words can mean different panel sets in different shops. Define your own package once in the software and every quote, every installer and every price stays consistent.
Go deeper
Related terms
More from films & coatings — The products themselves — PPF, ceramic, tint and wrap vinyl.
- Paint protection film (PPF)A clear (or coloured) thermoplastic urethane film applied over a vehicle's paint to absorb rock chips, scratches and road debris. Also called a clear bra. Sold and installed by the linear foot off a roll, usually 60 inches wide.
- Ceramic coatingA liquid polymer (often silica/SiO₂-based) that cures to a hard, hydrophobic layer bonded to the paint or over PPF. It adds gloss and makes the surface easier to clean, but — unlike film — it does not stop rock chips.
- Self-healing filmPPF with an elastomeric topcoat that flows back to smooth when warmed, so light swirl marks and fine scratches disappear with heat from the sun or warm water. It repairs the topcoat only — not a deep cut through the film.
- TPU (thermoplastic polyurethane)The material modern PPF is made from. TPU is elastic, clear and abrasion-resistant, which is why it can be stretched over curves and (with the right topcoat) self-heal. It largely replaced older, more brittle PVC films.
- Vinyl wrapAn adhesive-backed vinyl film applied to change a vehicle's colour or finish (gloss, matte, satin, chrome, colour-shift) or to carry commercial graphics. Reversible, unlike paint. Cast vinyl conforms to curves; calendered vinyl is cheaper but flatter.
- Window tintA thin film applied to glass to reduce light, glare and heat. Common types are dyed (budget), carbon (no signal interference, better fade resistance) and ceramic (best heat rejection). Darkness is measured as VLT.
Run the shop that uses these words
Live-margin quotes costed from your real film, film tracked to the foot, and an AI team on the calls and texts. Free for 14 days, no credit card.